WIFI control robot lawn mover auto glass cutter with LED display FREE SHIPPING

Save 44%
Plug Type

WIFI control waterproof robot lawn mover auto glass cutter with LED display,Time set-up system

Some functions introduction:

1.select cutting height on LCD display directly, more intelligent:

2.languages for your option(12):

English,French,German,Danish,Swedish,Finnish,Italian,Norwegian,Spanish,Dutch,Russian,Polish.and we could add more...

3.WIFI app available for IOS and Android mobile phones, more convenient for setting and remote control


Specification & Descripition
Model LRW- E1800 WIFI
Auto recharge
Coverage (for once charging)   500 Intelligent spiral
Working capacity 1500 Go straight
Virtual wire maximum length/diameter   600m/0.5mm Anti theft
Standard virtual wire length/diameter 100m/0.5mm Lift sensor
Mower size 52*39*27cm(LWH) Tilted sensor
Charging station size 60*50*17cm(LWH) Gyroscope
Rated Power 85W(average)    
Noise ≤60dB Intelligent cutting height adjusting
Qty for cutting blades 3pcs Bump sensor ●(side and front)
Cutting height 2.5-5.5cm LED display
Cutting width 21cm Waterproof
Cutting speed 35m/min Touch sensor
Blades rotate speed 3000rpm Time set-up system
Hill capability 30degree Max slope Emergency switch
Max ambient functioning temp. 40℃ Set up password
Average working time 2-3hours Language option
    Around virtual wire walking selection
Type of battery Lithium Mower can't been start when charging station power less
Battery capacity 4.4Ah/4.4Ah / 6.6Ah Mower can't been start when virtual wire has been cut off
Gross weight 19KGS Intelligent testing lawn
Net weight 16KGS Subarea setting

Charging time

≤2 hours Warranty 1 years
Rain sensor ●with this function,×without this function


2.2 Function:

- Lift sensor:There are lift sensors located between the top and middle
- Tilt sensor:There are tilt sensors installed on the mower too, when mower is tilted over 30 degrees in any direction, it the seconds. stops working within 2 seconds.
- Bump sensor: The whole top cover is movable. Both front and side of mower equipped with bump sensors that will activate when the mower strikes solid, fixed object when that object is at least 6cm in vertical height from the supporting surface of the mower. When the bump sensor activated, the mower will back up for working.
- Rain sensor:There are two rain sensors located on the mower. The mower will go back to the charging station automatically when it's raining.
Rain sensors can be selected ON/OFF from control panel.
Turn on: the mower will go back home if it is raining.
Turn off: the mower will go on mowing when it is raining.
- Wifi:The Android user search “EGROBOT” in the Google Store to download the application. The IOS user can search “EGROBOT” in the Apple
- Touch sensor
Touch the handle when the mower is cutting, it will cease function.
- Mowing schedule
Set up one week (From Monday to Sunday, once for schedule from control panel. This each day) cutting
- Anti-theft function
Mower has password protection option to guard against theft. What's more, the mower can not be turned on without a charging station.
- Cutting width:
21cm - Easy cutting height adjustments 2.5cm-5.5cm selected on LCD display.
- Auto recharge system When the mower senses a low battery situation, it will shut off the cutting motor and search for the virtual wire. Once found it will follow the virtual wire to the charging station for recharge automatically. Once charging is complete, the mower will back up a few centimeters ready to go again in stand by mode.
- Emergency stop switch:There is an emergency button located on the top of mower and in red color.
Rotate it to turn on the mower.
Press it to turn off the mower.
-Two cutting models
There are two cutting modes of the mower, go straight efficiency). and go circle (high In Auto, mower selects cutting mode intelligently. It goes straight if the grass is sparse or it has be cut off, long. and it goes circle if the grass is dense or In manual mode, the mower will go where you direct it.
-Virtual wire:The robot lawn mower can't be operated without a virtual wire. (we suggest to use 100m-600m of virtual wire). The mower will follow virtual wire to charging station, the virtual wire acts as a virtual fence. It will get on the virtual wire until it meets charging sheets, then it gets off from virtual wire and starts cutting inside.
- Mower stops working if virtual wire is cut off or charging station is power off.
If virtual wire is cut or broken, or the charging station loose power, the mower will stop working within 3 seconds.
- Five steps to safely start the mower There are five necessary steps to start the mower:
Connect charging station with power supply by charger and make sure the recharging light is in green color. 2. Connect virtual wire to charging station and make sure it is in good connecting(virtual wire light in colorless). 3. Turn on the power button and rotate the emergency button. 4. Input password if selected and select mode. 5. Select working time if needed(10-500mins).
- Overload protect The brushless cutting motor and each of the two running are monitored continuously during operation for motors cause these motors to over-load any situation that may In the event this is detected, the mower stops operating.
- Waterproof Waterproof design, there is an inner cover under top cover which protect inside parts from humidity..
The waterproof class is IP54
-LCD display
- Gyroscope The mower has gyroscope to keep it going straight on inclines.
- Subarea setting You can select Subareas for the mower to cut. This works well for large lawn. See Section 5.12. This function should be used together with schedule.
- Different languages selection.
- Range
- Intelligent cutting height adjustment
There are four range options, user can choose the
There are 7 settings which can be set on display directly.
distance when robot hit virtual wire according the condition of different lawns.
45678FRONT no logo

Warranty and Terms:

1.All our items (unless otherwise specified) are assured to be brand new and carried with fully at least 12 months warranty.

2.During warranty period, if any problem happens due to quality reason, please be cooperative to take photos or videos on the problem and send to us for verifying.

3.For confirmed product faulty on your approval, we can send you replacement parts free of charge. We will bear the shipping charge.

You recently viewed

Clear recently viewed